As a continuation of my Open Smart Hub project I have been interested in adding Z-Wave and Zigbee devices to my supported devices and recently decided to swing for Z-Wave devices first. I bought a Z-Wave Z-Stick Series 2 USB Dongle from Aeon Labs and a simple Z-Wave Door Sensor in order to create the basic mesh network with just two devices.
Since the Open Smart Hub is based in NodeJS, it only made sense to search for a Node port of the OpenZwave library. I stumbled upon Jonathan Perkin’s port of it to NodeJS (https://github.com/jperkin/node-openzwave)
Unfortunately, it does not work on Windows, and it seems to be having issues with the latest version of NodeJS… But luckily (or coincidentally) the Open Smart Hub runs on a Raspberry Pi 2 running Raspbian and NodeJS v0.10.28.
After the initial setup of my RPi2 with NodeJS, I got to work getting the node-openzwave module on my RPi2. I was seeing build errors when it was trying to install the module, but found a couple of blogs with information that in order to get it to work I might have to install a couple more tools.
sudo apt-get install build-essential make subversion
sudo apt-get install subversion libudev-dev make build-essential git-core python2.7 pkg-config libssl-dev
After that, it worked and I could call “npm install openzwave” and have it install properly.
Note: If you are interested in using it on Mac OSX, you will need to install the drivers for it. Read more about that process in a previous blog post.
Aeon Labs, the makers of the Z-Stick, a USB dongle for implementing a Z-Wave controller, don’t seem to provide information on how to get it setup on various operating systems and using it for the OpenZWave library on Mac means that you’ll need to be able to access it through the /dev/ directory. In order to do this on Mavericks, you need to install the latest drivers for the USB stick: http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
After finishing the install, it should now be visible as /dev/tty.SLAB_USBtoUART if you open a console on OSX and type
From here you can begin to use the Z-Stick by calling on the /dev/tty.SLAB_USBtoUART endpoint.
Getting NodeJS on a Raspberry Pi running the latest version of Raspbian isn’t as dead simple as it is on PCs, Mac OS X, or Linux. Only special versions of NodeJS were pre-built for Linux on ARM for Pi and a list of those versions doesn’t seem to be listed in an easy format.
In my case, I wanted to download NodeJS version 0.10.29 and the next closest NodeJS version for ARM was v0.10.28 or v0.10.30. You can search through each directory in the NodeJS distribution directory, but here is a small list of available Linux ARM versions when I last looked:
- v0.11.12 through v0.11.0 all have Linux ARM versions for pi as well:
In order to download them onto your Raspberry Pi you will need to type these commands into the shell, replacing the version for whichever you want:
tar -xvzf node-v0.10.28-linux-arm-pi.tar.gz
Now that you have it downloaded on your machine, you will want to add it to your path in order to allow it to be used from anywhere. So you will want to alter (or create if you don’t have one yet) a .bash_profile file in your root:
sudo nano ~/.bash_profile
then add these lines to the file:
Now after you reboot, you should see that you are able to use NodeJS regularly.